(066) 7124555
This email address is being protected from spambots. You need JavaScript enabled to view it.

Services - Cremur Heating Tralee

Oil Boiler Service

An annual boiler safety check and boiler service, carried out by a professional service engineer ensures that your boiler is functioning properly. Regular servicing of your boiler is important as it ensures that the boiler is working to the specifications designed by the boiler manufac-turer. This will help prolong the life of the boiler as well as reduce the risk of faults and ex-pensive repairs down the line. A detailed service will include inspection of the pipe work, ventilation, clearances etc. The system is then inspected, cleaned and re-assembled. The oper-ation of the boiler functions are then inspected for safe and correct operation. Finally a com-bustion efficiency test will be carried out to ensure that the appliance is operating at its maxi-mum performance levels.

Annual Service check list carried out by Cremur All boilers should be serviced in accordance with the manufacturer’s instructions. When Cremur carry out you’re an annual boiler service, our service engineer will carry-out the fol-lowing checklist:
Visual Inspection:
  • Check for oil leaks from tank and above ground piping/fittings
  • Check for significant corrosion on the boiler's outer sheet metal, its cast-iron sections, flue, electrical controls, nearby piping and components
  • Open the boiler top or look through the inspection port to check for cracks in the firebox or the target wall (the fire clay box or wall that the burner fires into or against)
  • Check the draft regulator for free movement
 Boiler Checks:
  • Replace fuel filter
  • Check operation of oil shut-off valve
  • Check air inlets to boiler room and burner for blockage/size
  • Check for cracks/damage to burner refractory
  • Clean/adjust spark electrodes
  • Clean burner diffuser and air tube
  • Check ignition transformer, HT cable and porcelain for cracking/deterioration
  • Check operation of draught stabilizer
  • Check/clean flame photocell
  • Clean boiler gas side heat transfer surfaces.
  • Check operation of high limit thermostat
  • Replace burner nozzle
  • Adjust burner pressure and diffuser plate to obtain correct flame shape/length
  • Check operation of flame failure device
In addition to the above checks, our service engineer will carry out a combustion effi-ciency test on your appliance. This will ensue that the boiler is operating at its optimum efficiency.
System Checks:
  • Check setting and operation of time clock
  • Check operation of zone values and thermostats

Showroom Opening Hours:
Mon to Sat: 8.30am - 5.30pm
Sun: 2.00pm – 5.00pm

Cremur Heating Centre Ltd
C.W.S. Complex
Upper Rock Street
Tralee, Co. Kerry
V92 YH5V

Call: (066) 7124555
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.